Search found 202 matches

by Tera
Fri Jun 24, 2022 10:14 am
Forum: SW General
Topic: How to show Hidden Lines in drawings?
Replies: 6
Views: 557

Re: How to show Hidden Lines in drawings?

I've seen so many weird things in Solidworks, but this one is the worst. Following @Glenn Schroeder's advice, copying and pasting the view solved the problem. I have no idea why copying and pasting the same view, shows the hidden lines, while the source view doesn't show it. Glenn million thanks. I ...
by Tera
Fri Jun 24, 2022 4:37 am
Forum: SW General
Topic: How to show Hidden Lines in drawings?
Replies: 6
Views: 557

How to show Hidden Lines in drawings?

No matter what I do and how I add a view, the hidden lines in view doesn't show up. It's only a specific assembly. Other assemblies have no problem. I've tested it on 2 machines with tried my own templates and SW's default templates. No improvement. Is there anything I can do to show hidden lines? -...
by Tera
Thu Jun 23, 2022 9:37 pm
Forum: SW General
Topic: SW 2022 SP3 - First Thoughts
Replies: 101
Views: 11183

Re: SW 2022 SP3 - First Thoughts

Bradfordzzz wrote: Thu Jun 23, 2022 5:48 am None of the features we use daily that are broken have been fixed yet.

So my first thought is basically just this ... <()>
Forget about the fixes. What else is broken?
by Tera
Thu Jun 23, 2022 5:37 am
Forum: SW General
Topic: Solidworks Mouse Gestures - Implemented Correctly?
Replies: 40
Views: 4071

Re: Solidworks Mouse Gestures - Implemented Correctly?

jcapriotti wrote: Wed Jun 22, 2022 11:09 am Opera for example allows more than just straight line movements:
Yes, Opera was the first browser to implement gestures. But Chrome and Firefox has gone beyond that.
You can set as many as 10 drags per gesture. <()>
2022-06-23_18-35-32.png
by Tera
Wed Jun 22, 2022 10:56 pm
Forum: SW General
Topic: SW 2022 SP2 - First Thoughts
Replies: 71
Views: 9934

Re: SW 2022 SP2 - First Thoughts

Tapani Sjöman wrote: Mon Jun 13, 2022 6:52 am When I select a component from an assembly tree, there shall pop an origo for moving or rotating that component. I don't like it. Can I disable that somehow? Could not found a solution by myself. :roll:

001_Selection_Origo.png
You have to turn off Instant3D
by Tera
Tue Jun 21, 2022 10:31 am
Forum: SW General
Topic: Solidworks Mouse Gestures - Implemented Correctly?
Replies: 40
Views: 4071

Re: Solidworks Mouse Gestures - Implemented Correctly?

First: the activation of what it is you want to do should NOT happen until you release the mouse button over the function that you want to do. With all respects, I think you've misunderstood what a mouse gesture is. They are not on-screen-buttons. they are gestures. Gestures started with browsers l...
by Tera
Sat Jun 11, 2022 6:32 pm
Forum: SW General
Topic: Mirroring Issue in Solidworks 2022
Replies: 32
Views: 8981

Re: Mirroring Issue in Solidworks 2022

Honestly, talk with your VAR's. They will certainly try to help as best as they can, and the argument you just made of being dependant of next year could be one you could use to either get some sort of "rebate" or maybe even have a free year added to your current subscription(Wouldn't tha...
by Tera
Sat Jun 11, 2022 9:44 am
Forum: SW General
Topic: Mirroring Issue in Solidworks 2022
Replies: 32
Views: 8981

Re: Mirroring Issue in Solidworks 2022

Mirroring issue will not be resolved until 4th quarter of this year. o[ o[ I wonder what will be broken then. In my experience with SW, correcting something means breaking something else. To me, it's a new type of marketing. If they don't resolve mirroring bug, we have to extend our subscription. W...
by Tera
Wed Jun 08, 2022 10:24 am
Forum: SW General
Topic: SolidWonks on Tablet
Replies: 19
Views: 1679

Re: SolidWonks on Tablet

Is eDrawings free? We have 3 licenses of SW Premium. How many PCs are we allowed to install eDrawings?
Sorry for hijacking thread.
by Tera
Wed Jun 08, 2022 4:00 am
Forum: SW General
Topic: SolidWonks on Tablet
Replies: 19
Views: 1679

Re: SolidWonks on Tablet

You also can export your assembly to eDrawing and save it as html.
Any browser (edge, Chrome, Firefox) can view/section/measure your assembly.

I often access my assemblies with my phone with this method.
by Tera
Sat Jun 04, 2022 7:13 pm
Forum: How To Questions
Topic: Importing 3D PDF into SOLIDWORKS
Replies: 5
Views: 1687

Re: Importing 3D PDF into SOLIDWORKS

Free online 3D pdf to STL converter
https://products.aspose.app/3d/conversion/pdf-to-stl#
by Tera
Thu Jun 02, 2022 5:23 am
Forum: SW General
Topic: What are your most impressive tricks of Solidworks
Replies: 162
Views: 68767

Re: What are your most impressive tricks of Solidworks

azreal1031 wrote: Wed Jun 01, 2022 3:27 pm you can double click a face in a part or an assembly, and it'll show all the driving dimensions.
For me it shows all Driving and Driven dimensions.
by Tera
Wed Jun 01, 2022 7:22 pm
Forum: SW General
Topic: Sharing 3D Models with non-CAD users
Replies: 30
Views: 4421

Re: Sharing 3D Models with non-CAD users

gupta9665 wrote: Mon May 02, 2022 12:42 pm You can enable Measure and STL export as needed.
eDrawings HTML.PNG
I have neither Enable Measure nor STL Export.
SW2022 - SP0
Any idea why?
2022-06-02_08-16-57.png
--


Edit : Sorry. Found it. I had to activate it in Solidworks Export options.
by Tera
Tue May 31, 2022 9:28 am
Forum: Catia and 3DX
Topic: Does anyone actually use 3DExperience in a productive manner?
Replies: 1290
Views: 296151

Re: Does anyone actually use 3DExperience? Still waiting.......

so that you don't need a 'file/folder-tree-system' anymore. I am just looking at my music library and my photo library on my phone right now and it's 100000000000000x better than with a file/folder system. The amount of files in a folder could theoretically be limitless. However, every time when th...
by Tera
Sat May 21, 2022 6:55 am
Forum: SW General
Topic: Sharing 3D Models with non-CAD users
Replies: 30
Views: 4421

Re: Sharing 3D Models with non-CAD users

gupta9665 wrote: Sat May 21, 2022 4:24 am Try the attacdhed file.
Perfect with Edge on win 11.
by Tera
Tue May 17, 2022 9:16 am
Forum: SW General
Topic: SW 2022 SP2 - First Thoughts
Replies: 71
Views: 9934

Re: SW 2022 SP2 - First Thoughts

Maybe we need a new thread called "Second Thoughts" ? My second thought was to uninstall sp2 and go back to sp0. I had serious problems with pack & go in sp2 concerning broken references. Back to sp0 and it seems I can use this feature again. Why should we pay this amount of money and...
by Tera
Thu May 12, 2022 12:07 pm
Forum: SW General
Topic: SW 2022 SP2 - First Thoughts
Replies: 71
Views: 9934

Re: SW 2022 SP2 - First Thoughts

@TeraDid this work in a previous version? We are on 2019 and it seems I ran across this before and it was related to virtual components not updating. Problem affects assembly renames in PDM as well as the "update references" code cannot 'reach' into virtual components that are embedded in...
by Tera
Thu May 12, 2022 10:19 am
Forum: SW General
Topic: SW 2022 SP2 - First Thoughts
Replies: 71
Views: 9934

Re: SW 2022 SP2 - First Thoughts

3. Why can't you re-name virtual Parts from the Assembly tree? I don't. Not that I can't. I simply select pack & go, then Replace the old name to new name (using replace all). The assembly has 158 parts. All sheet metal. 102 parts are OK. the rest ends up with broken references. No matter how m...
by Tera
Thu May 12, 2022 9:42 am
Forum: SW General
Topic: SW 2022 SP2 - First Thoughts
Replies: 71
Views: 9934

Re: SW 2022 SP2 - First Thoughts

Glenn Schroeder wrote: Thu May 12, 2022 8:36 am Pack and Go works fine in SW2022, as long as you don't try to re-name components as part of the process
All components are virtual. So there's no renaming.
Can you test if pack & Go has any problem with virtual parts?

thank you.

PS : Are you using SP2?
by Tera
Thu May 12, 2022 7:54 am
Forum: SW General
Topic: SW 2022 SP2 - First Thoughts
Replies: 71
Views: 9934

Re: SW 2022 SP2 - First Thoughts

Frank_Oostendorp wrote: Thu May 12, 2022 6:23 am @Tera,
yes, Pack&Go does not update references in new saved assembly. Supposed to be fixed in SP3.0.
Why something that has been working for years breaks in an update?
Is it possible to uninstall SP2 and go back to SP1 without uninstalling the whole application?


Thanks.
by Tera
Thu May 12, 2022 4:19 am
Forum: SW General
Topic: SW 2022 SP2 - First Thoughts
Replies: 71
Views: 9934

Re: SW 2022 SP2 - First Thoughts

Is there anything wrong with Pack & Go in SW2022 SP2?

It seems I can not Pack & Go an assembly. The task ends without any error, but the new assembly is full of broken references. I really hate SW.
-
1.png
by Tera
Wed May 11, 2022 7:07 pm
Forum: SW General
Topic: How to flip smart fasteners?
Replies: 5
Views: 715

Re: How to flip smart fasteners?

Glenn Schroeder wrote: Tue May 10, 2022 12:30 pm Did you try clicking on "Customize Menu" to see if it will show up?
Yes, It's what it shows on customize :
-
1.png
by Tera
Tue May 10, 2022 11:27 am
Forum: SW General
Topic: How to flip smart fasteners?
Replies: 5
Views: 715

Re: How to flip smart fasteners?

I'm on SW 2022 SP2. Another bug?
by Tera
Tue May 10, 2022 2:24 am
Forum: SW General
Topic: How to flip smart fasteners?
Replies: 5
Views: 715

How to flip smart fasteners?

I select the inner surface of a hole and select Smart Fasteners from the ribbon. Solidworks 2022 adds the smart fastener, but it's on the opposite direction. How can I flip the fastener? Every site or help page I see talks about a Flip button that I can not find. - 22.png - How can I flip a fastener...
by Tera
Mon May 02, 2022 6:40 pm
Forum: SW General
Topic: SW 2022 SP2 - First Thoughts
Replies: 71
Views: 9934

Re: SW 2022 SP2 - First Thoughts

There is one regression I found right away. (Search for SPR 1230978.) In 2020 if you do a concentric mate, a 2nd set of breadcrumbs appears to allow you to flip the mate or lock the rotation. According to the SPR, that option disappears immediately after it appears. I know some people hated this fe...
by Tera
Wed Apr 13, 2022 6:55 am
Forum: SW General
Topic: Why Solidworks fails to sketch pattern these features?
Replies: 4
Views: 968

Re: Why Solidworks fails to sketch pattern these features?

It is future version for me , so i cant open it , but you need to be careful with sketch patterning library features. I cant pattern library feature and sketch pattern at same time , BUT if i pattern library feature first and SW accepts it. than i can go back to edit that feature and add sketch pat...
by Tera
Wed Apr 13, 2022 2:48 am
Forum: SW General
Topic: Why Solidworks fails to sketch pattern these features?
Replies: 4
Views: 968

Why Solidworks fails to sketch pattern these features?

I'm trying to sketch pattern the selected features in a very simple sheet metal part. Unfortunately SW denies to finish the job. The seed for sketch pattern is A sketch above selected features. It seems that BrPattern is causing this problem. If I exclude BrPattern Everything's OK. I think I have do...
by Tera
Wed Apr 13, 2022 2:02 am
Forum: SW General
Topic: How is everyone liking Solidworks 2022 SP1?
Replies: 181
Views: 21017

Re: How is everyone liking Solidworks 2022 SP1?

More than 24 hours have passed and still I don't see SP2 in my portal.
by Tera
Fri Apr 01, 2022 5:55 am
Forum: SW General
Topic: How is everyone liking Solidworks 2022 SP1?
Replies: 181
Views: 21017

Re: How is everyone liking Solidworks 2022 SP1?

It seems that it's my lucky day.
How many times I try, I don't see the problem explained in mirror. Tested on different parts/assemblies.
Maybe my assemblies are not complicated enough. (only 152 components and all sheet metals)
by Tera
Fri Feb 25, 2022 9:49 pm
Forum: How To Questions
Topic: Mystery Appearance in 1 Configuration
Replies: 7
Views: 1046

Re: Mystery Appearance in 1 Configuration

All of a sudden my part turned black in one configuration. There is no appearance applied, so it can't be deleted. Being black makes it impossible to see what I am doing. I have restarted solidworks, but the problem returned. Please see this GIF. Does anyone know how to make this go away? Appearanc...
by Tera
Wed Feb 23, 2022 8:25 pm
Forum: How To Questions
Topic: How to Change Color of Lines on Drawing
Replies: 5
Views: 1880

Re: How to Change Color of Lines on Drawing

Right click ribbon, select Toolbars and then select Layers. Add a layer by clicking New button. Give it a name, set the color and line thickness as you like: - 1.png - In your drawing select the line you need to change its color, in property manager under Layer, select the layer you just added. - 2....
by Tera
Wed Feb 23, 2022 6:48 pm
Forum: How To Questions
Topic: Convert Solid to sheet metal
Replies: 10
Views: 1554

Re: Convert Solid to sheet metal

SamSpade wrote: Wed Feb 23, 2022 11:04 am For more complicated designs (with compounded angles and non 90° bends) I would opt to use the convert to sheet metal tool
Can give an example file when you prefer to use convert to sheet metal?
thanks.
by Tera
Mon Feb 21, 2022 6:56 pm
Forum: SW General
Topic: Cylindrical Section View
Replies: 2
Views: 340

Cylindrical Section View

Almost 2 months using SW2022 and I just noticed this one.
-
2022-02-22_08-45-12.png
2022-02-22_08-45-12.png (18.36 KiB) Viewed 339 times
-

I wonder how many more new features I'm missing.
Maybe I should read What's new more carefully.

http://help.solidworks.com/2022/English ... e_axis.htm
by Tera
Thu Feb 17, 2022 6:06 pm
Forum: SW General
Topic: Another one of Alin's 5%'ers
Replies: 8
Views: 774

Re: Another one of Alin's 5%'ers

Apparently it never occurred to anyone that if that component was already Fixed that box should be checked? @Glenn Schroeder Mine is checked. If I select "Configure Component" for a fixed component in an assembly, the checkbox you're talking about is checked. If the component is float, th...
by Tera
Sun Feb 13, 2022 7:43 pm
Forum: What's Wrong?
Topic: Jump to first unread post
Replies: 13
Views: 1624

Re: Jump to first unread post

Thanks for the reply.
Unfortunately breeze link doesn't contain this function.
I'll try another theme. But as far as I remember, all other themes show the title of the post above all replies.

Thanks again.
by Tera
Fri Feb 11, 2022 9:25 pm
Forum: What's Wrong?
Topic: Jump to first unread post
Replies: 13
Views: 1624

Jump to first unread post

I don't use forum's default theme. It makes me crazy seeing the title of the first post above all and every reply, and in such a big and bold font (just like the header of a breaking news in our daily paper) Though the color is not perfect, but I find Breeze theme in many ways better. At least it hi...
by Tera
Mon Feb 07, 2022 10:04 pm
Forum: SW General
Topic: So that's what that's for!
Replies: 29
Views: 3033

Re: So that's what that's for!

SolidMuse wrote: Mon Feb 07, 2022 6:31 pm I use it for getting parts rotated into a close approximation of where I want a part before applying mates.
I stopped using triad long time ago. I'm much comfortable to wheel click an edge or axis and rotate around the entity.

Just give it a try. You may find it faster and easier too.

cheers
by Tera
Mon Feb 07, 2022 4:06 pm
Forum: SW General
Topic: So that's what that's for!
Replies: 29
Views: 3033

Re: So that's what that's for!

In my opinion It's the most annoying feature in SW. I turned it off from the very first day I upgraded to 2022. For those who asked, yes, it goes away if you turn off instant3D. And if the component is fixed or fully defined by mate, you can not move the component using it. So it's totally worthless...
by Tera
Mon Feb 07, 2022 4:57 am
Forum: SW General
Topic: How to prevent sheet metal coordinates being exported to DXF?
Replies: 4
Views: 802

Re: How to prevent sheet metal coordinates being exported to DXF?

Customer impact is set to high. At least they know how bothering it is.
We hadn't any problem in 2021 version. I hope they correct it in sp1.

Thanks for the link.
by Tera
Mon Feb 07, 2022 3:49 am
Forum: SW General
Topic: How to prevent sheet metal coordinates being exported to DXF?
Replies: 4
Views: 802

Re: How to prevent sheet metal coordinates being exported to DXF?

This is probably SPR 1229251 "Sheet Metal - Export DXF DWG - if 'view sketches' is enabled, additional lines are added around the origin". Please try to check "Views -> Hide / Show -> Hide All Types" before exporting. That was it. Million thanks. Problem solved. I searched for t...
by Tera
Sun Feb 06, 2022 5:04 am
Forum: SW General
Topic: How to prevent sheet metal coordinates being exported to DXF?
Replies: 4
Views: 802

How to prevent sheet metal coordinates being exported to DXF?

When I export a sheet metal flat pattern as DXF, the coordinates are exported too.
How can I prevent coordinates being exported?
-
1.jpg
-

Thank you.
by Tera
Fri Feb 04, 2022 12:03 pm
Forum: SW General
Topic: Sheet Metal Flat Pattern Boundry for all configs?
Replies: 12
Views: 1729

Re: Sheet Metal Flat Pattern Boundry for all configs?

Austin Schukar wrote: Fri Feb 04, 2022 10:40 am Unfortunately you'll have to manually add these properties after you know the cutlist and part names, unless you invoke some sort of API, but that wouldn't be trivial
Thank you.
by Tera
Thu Feb 03, 2022 9:45 pm
Forum: SW General
Topic: Convert Entities (Points)
Replies: 4
Views: 866

Re: Convert Entities (Points)

Thanks for the info.
by Tera
Thu Feb 03, 2022 9:27 pm
Forum: SW General
Topic: How to add View Mates to a guesture?
Replies: 3
Views: 427

How to add View Mates to a guesture?

I'm trying to add View Mates Button to mouse gesture or one of my tabs, but I can't find the button to add it.
Or maybe button name is different with its tooltips.....
-
3.jpg
3.jpg (9.11 KiB) Viewed 427 times
-
Where can I find this button?

thank you.
by Tera
Thu Feb 03, 2022 4:20 pm
Forum: SW General
Topic: Sheet Metal Flat Pattern Boundry for all configs?
Replies: 12
Views: 1729

Re: Sheet Metal Flat Pattern Boundry for all configs?

Austin Schukar wrote: Mon Jan 31, 2022 12:54 pm but you could just create a new custom property and link it to:

"SW-Bounding Box Width@@@Cut-List-ItemX@PartX.SLDPRT"
How can I do it in a template. Because the template has no cut list or part name yet.
Thank you.
by Tera
Thu Feb 03, 2022 3:17 pm
Forum: SW General
Topic: How to Save As pdf?
Replies: 7
Views: 1137

Re: How to Save As pdf?

I searched for Font in options-Document Properties. I received a long list, but everything was set to Century Gothic. I changed the overall drafting standard to ANSI, and everything is OK now. It seems that there's a problem with JIS. I modified ANSI to what I need and everything's OK now. I really ...
by Tera
Thu Feb 03, 2022 3:49 am
Forum: SW General
Topic: Convert Entities (Points)
Replies: 4
Views: 866

Re: Convert Entities (Points)

RonE wrote: Thu Feb 03, 2022 2:25 am You're looking for the derived sketch: https://help.solidworks.com/2022/englis ... etches.htm
million thanks. Never thought of using derived sketch. I was looking into convert entities all the time.
You're a life saver.

thanks again.
by Tera
Wed Feb 02, 2022 9:56 pm
Forum: SW General
Topic: Convert Entities (Points)
Replies: 4
Views: 866

Convert Entities (Points)

I have a sketch that contains ONLY a lot of points. How can I have another sketch on a plane parallel to this sketch and convert all points without picking one point at a time? If I edit (add, delete) points from the first sketch, I need the second sketch update accordingly. Is there any solution fo...
by Tera
Wed Feb 02, 2022 4:21 pm
Forum: SW General
Topic: How to Save As pdf?
Replies: 7
Views: 1137

Re: How to Save As pdf?

Can you try changing to a different font? It may not be a long term solution, but might point you towards the source of the problem. I don't have used this font. I think Solidworks is trying to change used fonts to Arial Unicode MS and it can't find it. - 2.jpg - Edit : Just as a test, I changed th...