Soiledworks library of strange graphics issues and warnings.

[mike miller]

This thread isn't here to solve anything; it's only here because misery likes company. Most of these problems will never go away no matter how loudly we scream. But hey, at least we can enjoy the moment.

Anyhow, here's one to get it started. Please note that I am using a Solidworks certified graphics card...

[mike miller]

I frequently see this graphics glitch.........and it even automatically displays my desktop background before I have time to fully appreciate that glitzy status bar.

CRASH!!.jpg (29.28 KiB) Viewed 4669 times

[mike miller]

What on earth Solidworks?

See all those bend lines? Ctrl+Shift+Q does nothing. They are NOT showing in the part level, only in the assembly. Even weirder, the only way to fix it is to open each part file and close it; you don't even have to save it!

[DennisD]

What on earth Solidworks?

2021-06-08 09_46_18.jpg

See all those bend lines? Ctrl+Shift+Q does nothing. They are NOT showing in the part level, only in the assembly. Even weirder, the only way to fix it is to open each part file and close it; you don't even have to save it!

It is not a bug, it is personal. You are not paranoid, SWX really IS out to get you!

[mike miller]

This is weird. It's a master model, yes......but I have bigger ones that perform much better. Notice how the graphics area lags a few seconds behind the rotation cursor. I am trading off between MMB and a 3D mouse. But as soon as I click on a sketch to preview it, it speeds up about 10 times.

Here are my performance settings:

Changing the Image Quality settings does nothing.

[Frederick_Law]

If you haven't notice, SW took a few seconds to "wake up".
So if you click and move the mouse, cursor will be leading and moving ahead.
Try click, wait a second or two before moving the mouse.

[Merovingien]

you are working with an "opposite workflow", as the basic use of SW...

one basic is : in design tree, every sketch-construction are hidden.
except for some rare sketch you will need to use in upper ASM.
never work with the display-filter : hide all (you are working in a bad way with SW, like an opposite-thinking)

so disable "hide all"
hide all sketch in you tree
hide all "others things" in design tree, you see in 3D graphics, but you don' want to see.
(axis, plane, point...)

also, level of detail : set it at 4 graduations from the right side.

anti-aliasing can slower some 3D graphic viewer (i prefer set it off)
RealView also slower a little the gpu a little (i prefer set it off)

it also exists others settings elsewhere... to speed up 3D graphic SW.

[mike miller]

you are working with an "opposite workflow", as the basic use of SW...

one basic is : in design tree, every sketch-construction are hidden.
except for some rare sketch you will need to use in upper ASM.
never work with the display-filter : hide all (you are working in a bad way with SW, like an opposite-thinking)

so disable "hide all"
hide all sketch in you tree
hide all "others things" in design tree, you see in 3D graphics, but you don' want to see.
(axis, plane, point...)

also, level of detail : set it at 4 graduations from the right side.

anti-aliasing can slower some 3D graphic viewer (i prefer set it off)
RealView also slower a little the gpu a little (i prefer set it off)

it also exists others settings elsewhere... to speed up 3D graphic SW.

Oh that's a can of worms. Manually hiding all sketches and planes? Yeaaaaahh.........no thanks. That makes the Hide/Show toggles useless. How will you find something if you ever need it?

I'll be honest, I don't use Show/Hide All Types much, I normally use the toggles to the left in the Heads-Up Display for showing/hiding all planes/sketches/axes/etc. The toggles are there for a reason, why make life difficult? (One caveat: if I know I'll never need a certain plane/sketch again, I sometimes hide it just to de-clutter graphics space in a very large part.)

P.S. Besides, that has nothing to do with the graphics glitch. I use the same basic approach for many other large files and they work just fine.

[Merovingien]

you can try, for that part, to use "in a normal way" the hide-show
(enable it on the 3D-filter, and in the design-tree right-clic on each showed-item to set them as not-visible)
and see if the bug is still here.

[SPerman]

WTH are these dotted lines, and where did they come from?

[SPerman]

Sometimes it isn't the major deal breaking crash. It is the relentless water torture of minor inconveniences and annoyances, that in total, make me hate this software.

[Merovingien]

for the 3D-filter, using it in the opposite intend it should be, lead to only use (see) the top of the iceberg,
and passing away from more interesting and advanced features-technics.

the use of 3D-filter has already been talked/said in others threads on this forum.

Capture.png (5.29 KiB) Viewed 4394 times

that remind me people who think the "block rebuild" in PRT, should be the basis for every Library-part (turned on).
they misunderstand the feature, and are creating some problems in some cases, by using that feature in that way.


for the dotted line, it came from a hole-wizard, you probably change the size of the hole, or activate for a previous hole-wizard the "custom size", and the settign was kept in that part,
it also can be the change between threaded-hole to normal-hole, because hole wizard can bug a little, classic work-arround into hole-wizard can fix it, without deleting the feature.
you can also try to activate in the DRW, on each view the "thread in high quality"
(but warning, don't set it "on" into your DOTDRW, it isn't intend to be "on" as default)

[Jaylin Hochstetler]

I had a really weird one today.
It was loading a gauge table when I got this error.

Whoever was coding must of been ready to go home!
Then when I clicked "Okay" the gauge table remained open until I exited the sheet metal feature and clicked outside of the Excel worksheet area.

[Frederick_Law]

[Jaylin Hochstetler]

Graphic-100.jpg

Now that is weird! Was that photo-shopped?

[Frederick_Law]

Noop, 2 parts like that and other assembly are normal.
Close and open the part again, same $hit.

[JuTu]

Lately, SW has been on a funny mood from now an then.
It's quite interesting trying to work with THESE dimensions.

[john@layketool.com]

WTH are these dotted lines, and where did they come from?

image.png

THat looks like the cosmetic threads after you moved them in your model before opening up the drawing. We see that all the time & have reported it but like all other bugs they don't pay any attention to them.

[Glenn Schroeder]

It's not quite the same thing, but I've had an odd issue today. When modeling I like to have the model show as Shaded with Edges, but with tangent edges not set to show. When working with some Parts today the tangent edges have been consistently showing anyway. Sometimes a Ctrl+Q rebuild would fix it, and sometimes it wouldn't.

Through a small amount of experimentation I discovered that if I edited the appearance and selected a different color the behavior stopped.

[Jaylin Hochstetler]

The other day I had a strange one, too. I had drawing view of an assembly but as soon as I would click "save as" to save it as a PDF the one part in the assembly would turn to "Hidden Lines Removed". I saved and closed the assembly and then it worked fine.

[zxys001]

The other day I had a strange one, too. I had drawing view of an assembly but as soon as I would click "save as" to save it as a PDF the one part in the assembly would turn to "Hidden Lines Removed". I saved and closed the assembly and then it worked fine.

Wild... could be a display state toggle?

[zxys001]

Lately, SW has been on a funny mood from now an then.
It's quite interesting trying to work with THESE dimensions.

Yep... seen this... but just a check.. I work in perspective mode a lot... so, any chance you use perspective mode .. very common for the dims not to show properly... which imho is total bs.

[zxys001]

Graphic-100.jpg

Seen it and I've rebooted just because it is too weird.
And/or is it just me... was there a option years ago for changing the coordinate icon (maybe in a beta?)... if so, just wonder if it's still there somewhere and it get's turned on with older code?

[JuTu]

Yep... seen this... but just a check.. I work in perspective mode a lot... so, any chance you use perspective mode .. very common for the dims not to show properly... which imho is total bs.

Meh... I've never used Perspective mode - or so far I haven't used it. I wonder whether the issue might relate to GPU firmware... but what are the odds... I'm not sure am I the only one in my company using this computer setup. I have been thinking if I should reinstall all GPU software and firmware. Well... idk.

[Damo]

Hmmmm.. 2040..?!

And then it goes ahead and inserts the correct bend notes anyway.. EVERYTIME..

(SW 2021 SP4.1)

[mike miller]

This is a weird one. I noticed when adding a part to an assembly SWX allows you to pick a Solid Edge document. Of course, I had to try this........ Well, it appeared to do nothing until I noticed a feature below the rollback bar. LOL!!

2021-11-18 16_26_34.jpg (17.98 KiB) Viewed 3794 times

[jcapriotti]

This is a weird one. I noticed when adding a part to an assembly SWX allows you to pick a Solid Edge document. Of course, I had to try this........ Well, it appeared to do nothing until I noticed a feature below the rollback bar. LOL!!

2021-11-18 16_26_34.jpg

It would've be funny if one of those @ symbols had ended up in front of the $$.

[JuTu]

Lately, SW has been on a funny mood from now an then.
It's quite interesting trying to work with THESE dimensions.

This graphics glitch is affected by the options 'Display dimensions flat to screen'.
Toggling it off I got rid of the pesky 'feature'.