Problems With Swept Boss/Base

Use this space to ask how to do whatever you're trying to use SolidWorks to do.
Post Reply
Ballfreak10
Posts: 39
Joined: Wed Mar 17, 2021 11:05 am
Answers: 0
x 26
x 3

Problems With Swept Boss/Base

Unread post by Ballfreak10 »

Hi all,

In the attached file, I'm looking to create a swept feature using "SKETCH Path" as the Path, and "SKETCH Ac" as the Profile. However, when I try to do so, I get the below error message. Anyone know what's wrong here? Surely it mustn't require a closed contour for the Path sketch - that wouldn't make any sense.

All help is appreciated :)!

Thanks in advance,


image.png
Attachments
Rung.SLDPRT
(50.07 KiB) Downloaded 85 times
by Glenn Schroeder » Fri Apr 30, 2021 4:40 pm
It's not working because you have your profile sketch in the box for the path, and nothing selected for the profile.

image.png

If you select the proper sketches in the proper boxes it works just fine.

image.png
image.png

By the way, I'd strongly suggest you get in the habit of fully defining your sketches. If you don't I can just about guarantee it will bite you in the butt at some point.
Go to full post
Top
User avatar
Glenn Schroeder
Posts: 1508
Joined: Mon Mar 08, 2021 11:43 am
Answers: 23
Location: southeast Texas
x 1729
x 2111

Re: Problems With Swept Boss/Base

Unread post by Glenn Schroeder »

It's not working because you have your profile sketch in the box for the path, and nothing selected for the profile.

image.png
image.png (41.68 KiB) Viewed 1768 times

If you select the proper sketches in the proper boxes it works just fine.

image.png
image.png

By the way, I'd strongly suggest you get in the habit of fully defining your sketches. If you don't I can just about guarantee it will bite you in the butt at some point.
"On the days when I keep my gratitude higher than my expectations, well, I have really good days."

Ray Wylie Hubbard in his song "Mother Blues"
Top
Post Reply

Return to “How To Questions”