Simple Surfacing Tutorial - Watering Can

[matt]

I made a tutorial for making a simple watering can using surfaces in Solidworks a long time ago ( I think it is SW version 2007 or there abouts). You can go into the Downloads system for this site to get it, or click the link below the images. I modeled the part after a real part I bought at Lowes.






app.php/downloadsystemdownload?id=3

[Imics13]

I made a tutorial for making a simple watering can using surfaces in Solidworks a long time ago ( I think it is SW version 2007 or there abouts). You can go into the Downloads system for this site to get it, or click the link below the images. I modeled the part after a real part I bought at Lowes.






app.php/downloadsystemdownload?id=3

Hey my Friend,

Nice, thanks for sharing this tutorial I've tested #SolidEdge subD modeling with your model.
Not same, but similar to yours.

Here is my result:

[matt]

Hey my Friend,

Nice, thanks for sharing this tutorial I've tested #SolidEdge subD modeling with your model.
Not same, but similar to yours.

Here is my result:

Ah, great, subd, I love it. You can see how much easier subd is compared to all of those sketches and fiddling around.

Thanks!