CAD Forum

Posted: **Fri Apr 16, 2021 8:44 am**

We may have a good reason to visit the SwYmp:
https://r1132100503382-eu1-3dswym.3dexp ... -6xVGjS-nw

3DSwym-38.jpg

Posted: **Fri Apr 16, 2021 8:48 am**

So that was what you were refering to.

Lmao

Posted: **Fri Apr 16, 2021 8:49 am**

The SwYmP is like the wild west.
Eeeee Haaaaaa.

Posted: **Fri Apr 16, 2021 8:51 am**

Frederick_Law wrote: ↑Fri Apr 16, 2021 8:49 am The SwYmP is like the wild west.
Eeeee Haaaaaa.

I can't believe that they did not see this coming from a mile away, and there's just so many cases where I'm saying this about their platform, it's kind of discouraging to be honest.

Posted: **Fri Apr 16, 2021 8:55 am**

Yeap. They have no idea what a open forum is.

I was going to suggest online Porn SwYmP.....
but I might get kick here .....

Posted: **Fri Apr 16, 2021 8:56 am**

They took it down LOL

Posted: **Fri Apr 16, 2021 9:05 am**

Frederick_Law wrote: ↑Fri Apr 16, 2021 8:56 am They took it down LOL

After merely 4 hours and a half of being up there. Impressive!

Posted: **Fri Apr 16, 2021 9:08 am**

AlexLachance wrote: ↑Fri Apr 16, 2021 9:05 am
Frederick_Law wrote: ↑Fri Apr 16, 2021 8:56 am They took it down LOL
After merely 4 hours and a half of being up there. Impressive!

Probably because I commented

They're watching me

Posted: **Fri Apr 16, 2021 10:10 am**

@Frederick_Law @AlexLachance Yeah, pretty sure you guys are on the watch list.

image.png

Posted: **Fri Apr 16, 2021 10:14 am**

jcapriotti wrote: ↑Fri Apr 16, 2021 10:10 am @Frederick_Law @AlexLachance Yeah, pretty sure you guys are on the watch list.

image.png

I feel honored

Posted: **Sun Apr 18, 2021 6:12 am**

Seems like they had changed their IDEA pipeline
To me it is even more confusing than the old pipeline/funnel
hhhh

Posted: **Sun Apr 18, 2021 6:36 am**

RIP Macro answer

Posted: **Sun Apr 18, 2021 6:52 am**

I just notice...

For non migrated post, no LOGIN required....

For migrated post, you had to LOGIN to view the reply

Posted: **Mon Apr 19, 2021 6:01 pm**

well I went over there to see and not much has changed IMHO still very hard to find anything
Tags sheese!!!!

Posted: **Tue Apr 20, 2021 3:12 am**

I think the devs got there first.

Posted: **Tue Apr 20, 2021 3:52 am**

dave.laban wrote: ↑Tue Apr 20, 2021 3:12 am image.png

I think the devs got there first.

Posted: **Tue Apr 20, 2021 4:51 am**

I've tried many times on different days, frankly I'm trying to figure it out, but it's pretty complicated. that design makes me feel like an 80-year-old old man learning to use a smartphone.

Posted: **Tue Apr 20, 2021 7:16 am**

Ömür Tokman wrote: ↑Tue Apr 20, 2021 4:51 am I've tried many times on different days, frankly I'm trying to figure it out, but it's pretty complicated. that design makes me feel like an 80-year-old old man learning to use a smartphone.

Frankly I'm not trying to figure it out. I don't think it's worth the effort, especially since all the effort to learn it shouldn't be necessary.

Posted: **Tue Apr 20, 2021 7:27 am**

Glenn Schroeder wrote: ↑Tue Apr 20, 2021 7:16 am
Ömür Tokman wrote: ↑Tue Apr 20, 2021 4:51 am I've tried many times on different days, frankly I'm trying to figure it out, but it's pretty complicated. that design makes me feel like an 80-year-old old man learning to use a smartphone.
Frankly I'm not trying to figure it out. I don't think it's worth the effort, especially since all the effort to learn it shouldn't be necessary.

Hi Glen i hope you are fine.

So what's the logic in this?
So it
Will not be easy to learn.
Will not be easily accessible.
Will not be easy to find.
Is SW a professional firm giving up something or is there something we can't see (understand)?

Posted: **Tue Apr 20, 2021 7:52 am**

Ömür Tokman wrote: ↑Tue Apr 20, 2021 7:27 am
Glenn Schroeder wrote: ↑Tue Apr 20, 2021 7:16 am
Ömür Tokman wrote: ↑Tue Apr 20, 2021 4:51 am I've tried many times on different days, frankly I'm trying to figure it out, but it's pretty complicated. that design makes me feel like an 80-year-old old man learning to use a smartphone.
Frankly I'm not trying to figure it out. I don't think it's worth the effort, especially since all the effort to learn it shouldn't be necessary.
Hi Glen i hope you are fine.

So what's the logic in this?
So it
Will not be easy to learn.
Will not be easily accessible.
Will not be easy to find.
Is SW a professional firm giving up something or is there something we can't see (understand)?

No, it's just a mix of bureaucracy and idiocracy with most likely the wrong person leading the way.

Posted: **Tue Apr 20, 2021 8:31 am**

Ömür Tokman wrote: ↑Tue Apr 20, 2021 7:27 am
Glenn Schroeder wrote: ↑Tue Apr 20, 2021 7:16 am
Ömür Tokman wrote: ↑Tue Apr 20, 2021 4:51 am I've tried many times on different days, frankly I'm trying to figure it out, but it's pretty complicated. that design makes me feel like an 80-year-old old man learning to use a smartphone.
Frankly I'm not trying to figure it out. I don't think it's worth the effort, especially since all the effort to learn it shouldn't be necessary.
Hi Glen i hope you are fine.

So what's the logic in this?
So it
Will not be easy to learn.
Will not be easily accessible.
Will not be easy to find.
Is SW a professional firm giving up something or is there something we can't see (understand)?

I don't believe there is any.

Posted: **Tue Apr 20, 2021 8:41 am**

Zhen-Wei Tee wrote: ↑Sun Apr 18, 2021 6:12 am Seems like they had changed their IDEA pipeline
To me it is even more confusing than the old pipeline/funnel

image.png (28.15 KiB) Viewed 6525 times

They modeled after a very intuitive example from the past...Noted by many for it's clarity and usefulness...

Maybe not exactly, but they used the coloring scheme...

Posted: **Tue Apr 20, 2021 11:13 am**

dave.laban wrote: ↑Tue Apr 20, 2021 3:12 am image.png

I think the devs got there first.

OMG!

Posted: **Tue Apr 20, 2021 2:26 pm**

That's the magic of how they design the SwYmP.

Posted: **Tue Apr 20, 2021 2:27 pm**

More fun.
Is that the answer or not?

Posted: **Tue Apr 20, 2021 3:04 pm**

Frederick_Law wrote: ↑Tue Apr 20, 2021 2:27 pm More fun.
Is that the answer or not?
3DSwym-40.jpg

*shrug* it works. LOL except when I zoom in.....

Posted: **Tue Apr 20, 2021 3:50 pm**

Glenn Schroeder wrote: ↑Tue Apr 20, 2021 7:16 am Frankly I'm not trying to figure it out. I don't think it's worth the effort, especially since all the effort to learn it shouldn't be necessary.

I refuse to learn another convoluted software with no benefit to do so. The last for me was CATIA v4......oh wait, that was a Dassault designed product as well. I think UI design is not their forte.

Posted: **Tue Apr 20, 2021 3:52 pm**

dpihlaja wrote: ↑Tue Apr 20, 2021 3:04 pm
Frederick_Law wrote: ↑Tue Apr 20, 2021 2:27 pm More fun.
Is that the answer or not?
3DSwym-40.jpg
*shrug* it works. LOL except when I zoom in.....

Just buy the multi size pack of sticky notes and use the correct size when you zoom in...I should be on DS' payroll...

Posted: **Wed Apr 21, 2021 12:11 pm**

jcapriotti wrote: ↑Tue Apr 20, 2021 3:50 pm I think design is not their forte.

Posted: **Thu Apr 29, 2021 1:10 pm**

Poll closed. Here are the results:

Posted: **Thu Apr 29, 2021 1:22 pm**

mattpeneguy wrote: ↑Thu Apr 29, 2021 1:10 pm Poll closed. Here are the results:
image.png

I actually prefer this view. 3DSYWM barely beat out Reddit for second place on it's own forum

Posted: **Thu Apr 29, 2021 6:38 pm**

Zhen-Wei Tee wrote: ↑Sun Apr 18, 2021 6:12 am Seems like they had changed their IDEA pipeline
To me it is even more confusing than the old pipeline/funnel

image.png

OK. I truly hope you are all being sarcastic about this pipeline. That is just the traditional funnel diagram lying on its side. Nothing special about it. What they are not show is jettison of ideas! Not all ideas are going to go through. Or maybe they are showing that and none of the ideas are defined enought to make to the next pipe segment!

Posted: **Fri Apr 30, 2021 12:20 pm**

Ry-guy wrote: ↑Thu Apr 29, 2021 6:38 pm OK. I truly hope you are all being sarcastic about this pipeline. That is just the traditional funnel diagram lying on its side. Nothing special about it. What they are not show is jettison of ideas! Not all ideas are going to go through. Or maybe they are showing that and none of the ideas are defined enought to make to the next pipe segment!

Maybe a Colon would be a better analogy than a funnel. Except, one that has a few extra folds and creases where stuff will get stuck and stop moving through.

Posted: **Fri Apr 30, 2021 12:43 pm**

Posted: **Fri Apr 30, 2021 3:02 pm**

A quick test:

Go to SwYmP, Solidworks user forum.
Filter on Media, go into Gallery.
Everyone see the 2 video I uploaded?

Posted: **Fri Apr 30, 2021 5:10 pm**

Yep, your media shows when I click on "add media" to a post :

Posted: **Sat May 01, 2021 5:02 pm**

mattpeneguy wrote: ↑Fri Apr 30, 2021 5:10 pm Yep, your media shows when I click on "add media" to a post :
image.png

Okay, I honestly giggled at that

Posted: **Mon May 03, 2021 8:27 am**

'Nuff said. . .

Posted: **Mon May 03, 2021 8:33 am**

DennisD wrote: ↑Mon May 03, 2021 8:27 am 'Nuff said. . .

image.png

Wow, I'm not sure if this was edited to make it fit with 3DX, but if not, that sure is a coincidence lol

I love Dilbert

Posted: **Mon May 03, 2021 8:40 am**

DennisD wrote: ↑Mon May 03, 2021 8:27 am 'Nuff said. . .

image.png

Maybe post this at the SWYMP too?

Posted: **Mon May 03, 2021 8:57 am**

DennisD wrote: ↑Mon May 03, 2021 8:27 am 'Nuff said. . .

image.png

It's as if Scott Adams is lurking this forum for content...Hey, @matt, I think you've got a case to go after him for some of the royalties for that cartoon...

Posted: **Mon May 03, 2021 9:16 am**

AlexLachance wrote: ↑Mon May 03, 2021 8:33 am Wow, I'm not sure if this was edited to make it fit with 3DX, but if not, that sure is a coincidence lol

I love Dilbert

No editing was done in scanning and posting those Dilbert's!! They were from this past Friday and Saturday (April 30-May 1, 2021).

Scott Adams is dead-on!

Posted: **Mon May 03, 2021 6:28 pm**

If you like Dilbert you would be happy to know that Scott Adams was a keynote at one of the PLM World sessions awhile back. (like 10 years ago) You should have seen the cartoons that didn't make it past the editors. Literally, we had people fall out of chairs in the session!

Posted: **Mon May 03, 2021 7:04 pm**

I saw this graphic from the swamp:

And this is all that I could think of it:

Should I put some of my work together and offer my services to their marketing department?

Posted: **Tue May 04, 2021 12:31 am**

mattpeneguy wrote: ↑Mon May 03, 2021 7:04 pm I saw this graphic from the swamp:

image.png

And this is all that I could think of it:

image.png

Should I put some of my work together and offer my services to their marketing department?

Hey, that's pretty catchy!

I know that is terrible...because it does affect people..personally, I lost 4 people ranging from 36 to 82 from it- outside of age no pre-existing conditions.

Posted: **Tue May 04, 2021 8:02 am**

mattpeneguy wrote: ↑Mon May 03, 2021 7:04 pm

Should I put some of my work together and offer my services to their marketing department?

I think you should enter that in a banner contest for the 3DSwamp! (Note the lack of purple font. I'm sure! But don't call me Shirley.)

Posted: **Tue May 04, 2021 3:19 pm**

Interesting that they don't mention that the SW area is for SW:

I guess DS already thinks SW desktop is dead?

Posted: **Tue May 04, 2021 3:24 pm**

mattpeneguy wrote: ↑Tue May 04, 2021 3:19 pm Interesting that they don't mention that the SW area is for SW:
image.png
I guess DS already thinks SW desktop is dead?

Posted: **Tue May 04, 2021 3:28 pm**

Glenn Schroeder wrote: ↑Tue May 04, 2021 3:24 pm image.png

AFAIK, 3DEXP Works desktop =! SW.
But, maybe it is...I didn't get the memo, if so...
https://www.solidworks.com/3dexperience-works

Posted: **Tue May 04, 2021 3:48 pm**

Its "3DEXPERIENCE Work - desktop, cloud-connected or pure cloud", nothing Solid.

CAD Forum

Does anyone actually use 3DExperience in a productive manner?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?

Re: Does anyone actually use 3DExperience?