Page 1 of 1
Simple Surfacing Tutorial - Watering Can
Posted: Fri Apr 09, 2021 12:48 pm
by matt
I made a tutorial for making a simple watering can using surfaces in Solidworks a long time ago ( I think it is SW version 2007 or there abouts). You can go into the Downloads system for this site to get it, or click the link below the images. I modeled the part after a real part I bought at Lowes.
app.php/downloadsystemdownload?id=3
Re: Simple Surfacing Tutorial - Watering Can
Posted: Wed Jul 07, 2021 10:53 am
by Imics13
matt wrote: ↑Fri Apr 09, 2021 12:48 pm
I made a tutorial for making a simple watering can using surfaces in Solidworks a long time ago ( I think it is SW version 2007 or there abouts). You can go into the Downloads system for this site to get it, or click the link below the images. I modeled the part after a real part I bought at Lowes.
app.php/downloadsystemdownload?id=3
Hey my Friend,
Nice, thanks for sharing this tutorial I've tested #SolidEdge subD modeling with your model.
Not same, but similar to yours.
Here is my result:
Re: Simple Surfacing Tutorial - Watering Can
Posted: Wed Jul 07, 2021 12:02 pm
by matt
Imics13 wrote: ↑Wed Jul 07, 2021 10:53 am
Hey my Friend,
Nice, thanks for sharing this tutorial I've tested #SolidEdge subD modeling with your model.
Not same, but similar to yours.
Here is my result:
Ah, great, subd, I love it. You can see how much easier subd is compared to all of those sketches and fiddling around.
Thanks!