Page 1 of 1
cad layer standards
Posted: Fri Oct 15, 2021 10:55 am
by David Matula
any one out there have any info on AIA cad layer guidelines as set forth in the national cad standard .org?
nationalcadstandard.org
Re: cad layer standards
Posted: Fri Oct 15, 2021 11:06 am
by mattpeneguy
You're in luck. The Army Corps adopted it. So, it's available through them.
Here's a link:
https://usace.contentdm.oclc.org/digita ... l1/id/3835
Also, we copied and altered it a little for our needs. I have attached a copy.
Re: cad layer standards
Posted: Tue Nov 02, 2021 3:31 am
by JuTu
Even though ANSI or ASTM starndards are not that useful here in the Scandinavia, I still appreciate information. Thanks, Matt!
Re: cad layer standards
Posted: Tue Nov 02, 2021 8:29 am
by mattpeneguy
Compare what we've done to the original and if it makes sense, by all means use what we've done. IIRC, we modified some of the layer naming and specified things like it has to be third angle projection, that will always be the same for us. Because you are in Scandinavia, it'll definitely require modifying for metric, etc.